Statistical multiplexing is a type of communication link sharing, very similar to dynamic bandwidth allocation (DBA). In statistical multiplexing, a communication channel is divided into an arbitrary number of variable bitrate digital channels or data streams. The link sharing is adapted to the instantaneous traffic demands of the data streams that are transferred over each channel. This is an alternative to creating a fixed sharing of a link, such as in general time division multiplexing (TDM) and frequency division multiplexing (FDM). When performed correctly, statistical multiplexing can provide a link utilization improvement, called the ''statistical multiplexing gain''. Statistical multiplexing is facilitated through packet mode or packet-oriented communication, which among others is utilized in packet switched computer networks. Each stream is divided into packets that normally are delivered asynchronously in a first-come first-served fashion. In alternative fashion, the packets may be delivered according to some scheduling discipline for fair queuing or differentiated and/or guaranteed quality of service. Statistical multiplexing of an analog channel, for example a wireless channel, is also facilitated through the following schemes: * Random frequency-hopping orthogonal frequency division multiple access (RFH-OFDMA) * Code-division multiple access (CDMA), where different amount of spreading codes or spreading factors can be assigned to different users. Statistical multiplexing normally implies "on-demand" service rather than one that preallocates resources for each data stream. Statistical multiplexing schemes do not control user data transmissions.

Comparison with static TDM

Time domain statistical multiplexing (packet mode communication) is similar to

time-division multiplexing Time-division multiplexing (TDM) is a method of transmitting and receiving independent signals over a common signal path by means of synchronized switches at each end of the transmission line so that each signal appears on the line only a fracti ...

(TDM), except that, rather than assigning a data stream to the same recurrent time slot in every

TDM TDM may refer to: * ''TDM (film), TDM'', a 2023 Indian Marathi language, Marathi comedy film * TDM (Macau) (), a Macanese radio and television network * The Yamaha TDM, a motorcycle model * Target Disk Mode, a boot mode on certain Macintosh compute ...

, each data stream is assigned time slots (of fixed length) or

data frame A frame is a digital data transmission unit in computer networking and telecommunication. In packet switched systems, a frame is a simple container for a single network packet. In other telecommunications systems, a frame is a repeating structure s ...

s (of variable lengths) that often appear to be scheduled in a randomized order, and experience varying delay (while the delay is fixed in TDM). Statistical multiplexing allows the bandwidth to be divided arbitrarily among a variable number of channels (while the number of channels and the channel data rate are fixed in TDM). Statistical multiplexing ensures that slots will not be wasted (whereas TDM can waste slots). The transmission capacity of the link will be shared by only those users who have packets. Static TDM and other circuit switching is carried out at the

physical layer In the seven-layer OSI model of computer networking, the physical layer or layer 1 is the first and lowest layer; The layer most closely associated with the physical connection between devices. This layer may be implemented by a PHY chip. The ...

in the

OSI model The Open Systems Interconnection model (OSI model) is a conceptual model that 'provides a common basis for the coordination of SOstandards development for the purpose of systems interconnection'. In the OSI reference model, the communications ...

and

TCP/IP model The Internet protocol suite, commonly known as TCP/IP, is a framework for organizing the set of communication protocols used in the Internet and similar computer networks according to functional criteria. The foundational protocols in the suit ...

, while statistical multiplexing is carried out at the

data link layer The data link layer, or layer 2, is the second layer of the seven-layer OSI model of computer networking. This layer is the protocol layer that transfers data between nodes on a network segment across the physical layer. The data link layer p ...

and above.

Channel identification

In statistical multiplexing, each packet or frame contains a channel/data stream identification number, or (in the case of

datagram A datagram is a basic transfer unit associated with a packet-switched network. Datagrams are typically structured in header and payload sections. Datagrams provide a connectionless communication service across a packet-switched network. The del ...

communication) complete destination address information.

Usage

Examples of statistical multiplexing are: * The

MPEG transport stream MPEG transport stream (MPEG-TS, MTS) or simply transport stream (TS) is a standard digital container format for transmission and storage of audio, video, and Program and System Information Protocol (PSIP) data. It is used in broadcast systems ...

for

digital TV Digital television (DTV) is the transmission of television signals using digital encoding, in contrast to the earlier analog television technology which used analog signals. At the time of its development it was considered an innovative advanc ...

transmission. Statistical multiplexing is used to allow several video, audio and data streams of different data rates to be transmitted over a bandwidth-limited channel (see

Statistical multiplexer Statistical multiplexing is a type of communication link sharing, very similar to dynamic bandwidth allocation (DBA). In statistical multiplexing, a communication channel is divided into an arbitrary number of variable bitrate digital channels or ...

). The packets have constant lengths. The channel number is denoted Program ID (PID). * The UDP and TCP protocols, where data streams from several application processes are multiplexed together. The packets may have varying lengths. The

port number In computer networking, a port is a number assigned to uniquely identify a connection endpoint and to direct data to a specific service. At the software level, within an operating system, a port is a logical construct that identifies a specific ...

s constitute channel identification numbers (and also address information). * The

X.25 X.25 is an ITU-T standard protocol suite for packet-switched data communication in wide area networks (WAN). It was originally defined by the International Telegraph and Telephone Consultative Committee (CCITT, now ITU-T) in a series of drafts ...

and

Frame Relay Frame Relay is a standardized wide area network (WAN) technology that specifies the physical and data link layers of digital telecommunications channels using a packet switching methodology. Originally designed for transport across Integrated Se ...

packet-switching protocols, where the packets have varying lengths, and the channel number is denoted virtual connection identifier (VCI). The international collection of

providers, using the

protocol suite The protocol stack or network stack is an implementation of a computer networking protocol suite or protocol family. Some of these terms are used interchangeably but strictly speaking, the ''suite'' is the definition of the communication protoc ...

was colloquially known as "the Packet switched network" in the 1980s and into the beginning of the 1990s. * The

Asynchronous Transfer Mode Asynchronous Transfer Mode (ATM) is a telecommunications standard defined by American National Standards Institute (ANSI) and ITU-T (formerly CCITT) for digital transmission of multiple types of traffic. ATM was developed to meet the needs of ...

packet-switched protocol, where the packets have fixed length. The channel identification number consists of a virtual connection identifier (VCI) and a

Virtual Path Identifier Asynchronous Transfer Mode (ATM) is a telecommunications standard defined by American National Standards Institute (ANSI) and ITU-T (formerly CCITT) for digital transmission of multiple types of traffic. ATM was developed to meet the needs of ...

(VPI).

Statistical multiplexer

In digital audio and video broadcasting, for example, a statistical multiplexer is a content aggregating device that allows broadcasters to provide the greatest number of audio or video services for a given bandwidth by sharing a pool of fixed bandwidth among multiple services or streams of varying bitrates. The multiplexer allocates to each service the bandwidth required for its real-time needs so that services with complex scenes receive more bandwidth than services with less complex ones. This bandwidth sharing technique produces the best video quality at the lowest possible aggregate bandwidth. Examples of statistical multiplexers include the Imagine Communications (RGB Networks) BNPXr product line, Harmonic Inc. ProStream, Electra and VOS product families or the

Motorola Motorola, Inc. () was an American Multinational corporation, multinational telecommunications company based in Schaumburg, Illinois, United States. After having lost $4.3 billion from 2007 to 2009, the company split into two independent p ...

(

Terayon Terayon Communication Systems, Inc. was a company that vended equipment to broadband service providers for delivering broadband voice, video and data services to residential and business subscribers. History Terayon was founded by Israeli brother ...

) DM6400 and TMIR

External links

Example of Statistical Multiplexing
(Chart from a real DVB-T multiplex) {{DEFAULTSORT:Statistical Multiplexing Multiplexing Packets (information technology) Network scheduling algorithms he:ריבוב#ריבוב סטטיסטי

Comparison with static TDM

Channel identification

Usage

Statistical multiplexer

See also

External links